Welcome to Panasonic Security System support site. Find solutions and help for your Panasonic Security System products. You can check the technical information, "simple description of i-PRO configuration software" .
- >Panasonic Security System Top
- >Training & Support
- >Support
- >Technical Information
- >Simple description of i-PRO configuration software
Simple description of i-PRO configuration software
Simple description of i-PRO configuration software
--- Index ----

NOTE : This page has described the operation for a camera.
Description of the recorder, please refer to the instruction manual. .
1, Overview
i-PRO Configuration Software is the software that is designed to configure the settings of network disk recorders, network interface units (encoders) and network cameras using a PC via a network.
It is possible to configure IP addresses of recorders, encoders, and cameras at once. It is also possible to upload the edited settings to the devices and download the current settings from the devices. And also, if system has any troubles, you can get whole system information via this software.
2, Spec & Function
Item | Spec & Function | |
---|---|---|
Supported Devices | Camera: | WV-NP24x,WV-NP100x,WV-NS202A,WV-NF284,WV-NW484, WV-NS95x, WV-NW96x,WV-NF302, WV-NP304, WV-NP502, WV-NW502S, WV-SP302, WV-SP305, WV-SP306, WV-SF332, WV-SF335, WV-SF336, WV-SP102, WV-SP105, WV-SC385, WV-SW395,WV-SC384,WV-SW355, WV-SW352, WV-SF346, WV-SF342 WV-SW155 ,WV-SW152 , WV-SF135 , WV-SF132 , WV-SW396 WV-SC386, WV-SW316L, WV-SW316, WV-SW314, WV-SP509, WV-SP508, WV-SW559, WV-SW558,WV-SW175, WV-SW172, WV-ST165, WV-ST162 |
Encoder: | WJ-NT304, WJ-NT314, WJ-GXE500 | |
Recorder: | WJ-ND400, WJ-ND300A, WJ-ND200, WJ-HD716/616, WJ-NV200 | |
Decoder: | WJ-GXD400 | |
Initial setup of i-PRO System | IP address setting (Max 264 devices) * Not support WJ-ND400, WJ-HD716/616, WJ-NV200 |
|
Recorder administrator console | Start the recorder's administrator console. * For WJ-ND200/300, it is necessary to install a setting tool beforehand from attachment CD of WJ-ND200/300 or BIG-WEB. * Not support WJ-NV200 |
|
Download the setup file | Download the settings from devices and create the setup file.(Max 256 devices) * For WJ-NV200, it exclude face matching data. |
|
Upload the setup file | Upload the setup file to devices.(Max 256 devices) | |
Upgrade the firmware | Upgrade the software. (Max 256 devices) * Additional Support Device : WJ-HD309, WJ-HD316A |
|
Download the log file | Download the log files from devices.(Max 256 devices) * Additional Support Device : WJ-HD309, WJ-HD316A |
|
Change the login user | Change the password to be required for login. |
NOTE : It is based on Ver 3.5.0.1
2-1, System requirements for a PC
OS | Microsoft® Windows® 7 Professional (32-bit) Microsoft® Windows® 7 Professional (64-bit) Microsoft® Windows Vista® Business SP2 (32-bit) Microsoft® Windows Vista® Business SP2 (64-bit) Microsoft® Windows® XP Professional SP3 Microsoft® Windows® XP Home Edition SP3 |
|
---|---|---|
CPU | Intel® Pentium® 4 3.0 GHz or faster | |
Physical memory | 1 GB or more (A minimum 512 MB memory is required when using Microsoft®Windows® XP.) |
|
Network interface | 10/100 Mbps Network interface card must be installed. | |
Required hard disk space | 225MB(Software and run-time Library) |
3. How to get " i-PRO configuration software"
The i-PRO configuration software can be downloaded from here.
Click "ZIP" of your Region.
4. How to use " i-PRO configuration software"
4-1. IP Network configuration
4-1-1. After installing the tool, Click the icon to run the software.
4-1-2. Enter ID/PWD for i-PRO configuration software
Default
ID: ADMIN (upper case)
PWD: 12345
4-1-3. Select "Initial Setup of 'i-PRO system' "
4-1-4. Click "Search" button.
4-1-5. Select the detected camera from list ,and double click
You can set manually,and click "OK"
4-1-6. Click 'Assign IP address' after manual setting.
4-2. Download the set up file (device configurations)
4-2-1. After installing the tool, Click the icon to run the software.
4-2-2. Enter ID/PWD for i-PRO configuration software
Default
ID: ADMIN (upper case)
PWD: 12345
4-2-3. Select "Download the setup file"
4-2-4. Click "Add" button.
4-2-5. Enter the IP addresses of the devices and Login ID/PWD, and leave "80, 21" for HTTP and FTP port if they were not changed on the recorders manually.
NOTE :
*If there are multiple products, you can enter IP Range or you can add a specific IP again after you set an IP address.
. | Default ID | Default Password |
---|---|---|
Camera/Encoder/Decoder | admin (lower case) | 12345 |
Recorder (DVR/NVR) | ADMIN (upper case) | 12345 |
Then, Click "Set" button.
4-2-6. Click "Start" on the buttom and Select "Check box on device".
Then, the tool will start downloading and the data will be saved on the PC desktop.
4-3. Firmware Upgrade
4-3-1. After installing the tool, Click the icon to run the software.
4-3-2. Enter ID/PWD for i-PRO configuration software
Default
ID: ADMIN (upper case)
PWD: 12345
4-3-3. Select "Upgrade the firmware"
4-3-4. Check "Auto Select upgrade....." and Click "Browse" button.
4-3-5. Select a folder which has a firmware/firmwares to upgrade and Click "OK".
Firmware upgrade for multiple different devices is possible.
4-3-6. Click "Add" button.
4-3-7. Enter the IP addresses of the devices and Login ID/PWD, and leave "80, 21" for HTTP and FTP port if they were not changed on the recorders manually.
NOTE :
*If there are multiple products, you can enter IP Range or you can add a specific IP again after you set an IP address.
. | Default ID | Default Password |
---|---|---|
Camera/Encoder/Decoder | admin (lower case) | 12345 |
Recorder (DVR/NVR) | ADMIN (upper case) | 12345 |
Then, Click "Set" button.
4-3-8. Click "Start" on the buttom and Select "Check box on device".
Then, the tool will start downloading and the data will be saved on the PC desktop.
If you would like to explore theother features offered by this software, see i-PRO Configuration Software Operating Instructions(PDF) for further documentation.
- i-PRO camera has two kind of Firmware which are Driver (Camera) Software & Application (Network) Software. In that case, you should version up two times. First is Driver-firmware, second is App-firmware.

4-4. Firmware Upgrade
4-4-1. After installing the tool, Click the icon to run the software.
4-4-2. Enter ID/PWD for i-PRO configuration software
Default
ID: ADMIN (upper case)
PWD: 12345
4-4-3. Select "Download the log file"
4-4-4. Click "Add" button.
4-4-5. Enter the IP addresses of the devices and Login ID/PWD, and leave "80, 21" for HTTP and FTP port if they were not changed on the recorders manually.
NOTE :
*If there are multiple products, you can enter IP Range or you can add a specific IP again after you set an IP address.
. | Default ID | Default Password |
---|---|---|
Camera/Encoder/Decoder | admin (lower case) | 12345 |
Recorder (DVR/NVR) | ADMIN (upper case) | 12345 |
Then, Click "Set" button.
4-4-6. Click "Start" on the buttom and Select "Check box on device".
Then, the tool will start downloading and the data will be saved on the PC desktop.